Why selecting the right pump for projects is crucial

Why selecting the right pump for projects is crucial
Published: 8 January 2018 - 1 a.m.
By: Rajiv Ravindran Pillai

If you need to learn about pumps, Balagopal Nair, marketing and business development manager at Faisal Jassim Group, is the man to go to. From using the right type of pumps to focusing more on energy efficiency, Nair hits the nail in the head when it comes to understanding the philosophy behind pumps.

Nair says: “Everyone is aware of what pumps are. The technology is very well known to everyone. Pump is just used for pumping a media; the media can be water or oil. We should enrich and enhance the knowledge of pumps and understand how we can make pumps more efficient. This is how the market should be thinking about pumps.”

However, Nair is annoyed that people do not ask the right questions. People are only concerned about what the kilowatt and footprint of a pump are, he says, adding: “No one has ever asked me what the best pump is to use for a particular application, for the given capacities or for the given hydraulics. Usually the designers will give us the hydraulics, and based on the hydraulics we select a pump.”

He says that there are several factors to consider when selecting a pump such as efficiency, footprint, and ease of maintenance. 

A building may have several pumps performing various tasks. Although pumps do not represent a large fraction of the total building cost, careful selection of the pump type and size will reduce the first cost and the cost of operation of the building over the years. In addition, proper selection of the pumps in terms of project specification and requirements will also make the building more valuable by providing reliable service at a low cost. 

According to a text book definition: pump selection is the process of matching the characteristics of the pump to the requirements of the system. In order to do that, we must know what kinds of pumps are available for use in building service systems. 

Nair said that the the thought process has to change. “Just copy-pasting the specifications which was there for the last 20 years and complying with the same thing, is not going to work,” Nair says.

There are several consultants that are based in Europe or the US, and they follow the same specifications here as are in those countries. He says: “It is not adjusted to the situation in the Middle East. So you will find a lot of contradictions in the specifications and this will call for unwanted arguments with respect to consultants and contractors.”

He says that European consultants prefer to go follow the standards set by European manufacturers and that they use certain standards in the construction material. But in the US, they follow the Hydraulic Institute Standard, where they specify a certain criteria of performance as well as certain type of material to be used. 

All about efficiency

However, Nair says that the end game is about efficiency.

He says: “When I talk about understanding a pumping application, one of the biggest things to consider is efficiency.” He reminds us that now with the Dubai government focusing more on sustainability, green buildings, and retrofitting, a pump manufacturer and a consultant should know how to get a better efficient pump. He says: “They have to come up with innovative ideas or use some special controls to achive efficiency at an optimum level, irrespective of the fluctuation of the load.”

Highlighting more on the innovation aspect of pumps, Nair says: “People should focus on intelligent pumping applications like providing digital sensors with a variable speed drive, and which will be connected to the building management system, so that we can monitor what exactly is happening on the pump operation and where to balance the pump if there is an issue with the performance in the efficiency level. They can re-tune the system or rebalance the system to get a better result.” He says that some of the pumps in existing projects lack intelligent controls.

However, Nair does admit that the efficiency levels of pumps have been increasing over the years. “Five years ago, pump manufacturers used to talk about an efficiency level of 80-82%, and that too you will not be able to get for all the hydraulics. I still remember when the consultant used to write saying that the pump efficiency should be in the range of 75% and that was an acceptable level at that time. But today the pump manufacturers are providing pumps with efficiencies above 90-92%. So you can say in another couple of years, an average efficiency level of pumps at most of the hydraulics, will be in the range of 90%.”


Click here to add your comment

Please add your comment below
Your email address will not be published